SOFTWARE & APP
THE WORLD FIRST DATA ACQUISITION SYSTEM FOR MTB AND MX


BYB Telemetry detects the motion of the suspension and other dynamic parameters of the MTB while riding, in order to base the setting on quantitative information instead of feelings.

HOW BYB TELEMETRY CAN IMPROVE YOUR PERFORMANCE?
Suspension technology has drastically evolved
in the last years, reaching an incredibly high standard
of quality and performance, but also complication level.
With more tuning parameters available on every suspension system,
finding a proper suspension setup is not a straightforward operation.
Every rider would like to have a perfectly balanced
and smooth bike on a rough or technical section.
In fact, an optimal setup can make the difference concerning
chronometric feedback and fatigue.
This is true for the professional, but also for the amateurs riders.
These are the benefits you will get when using data instead of feelings.
HOW BYB TELEMETRY WORKS?
Thanks to a set of universal supports, BYB Telemetry can be easily installed on every bike: downhill, enduro, cross country, e-bike and even Motocross bikes in less than 20 minutes.
You can start riding immediately because no calibration is needed.
After your data acquisition sessions, you can directly download your runs to our software & app in order to analyze the data and get the best out of your bike!

SOFTWARE & APP

SOFTWARE
-
Advanced display and calculations over the acquired metrics
-
GPS tracking
-
%, mm, suspension or wheel travel visualization
-
True leverage ratio interpolation
-
Suspension charts overlay with other data
-
Interval selection with dynamics metrics and averages
-
Position distribution and Velocity distribution
-
Highly-intuitive charts to immediate understanding
-
Comparison between two runs (times and distance)
-
Dedicated space to store settings and notes
-
Auto-tuning function
-
Lifetime and free regular updates
APP
-
Fast and easy-to-use device configuration menu
-
Summary of your run
-
Advanced display and calculations on the metric acquired
-
GPS tracking
-
%, mm, suspension or wheel travel visualization
-
Suspension, accelerometer and speed charts
-
Resizable interval selection
-
Position distribution
-
Velocity distribution
-
Dedicated space to store settings and notes
-
Auto-tuning function
-
Lifetime and regular updates

STACK VIEW

The stack view contains dynamically all the information about your run
COMPARISON

The comparison lets you interact with different runs on the same track and understand where you need to focus more
POSITION DISTRIBUTION

The position distribution shows the overall balance of the bike
VELOCITY DISTRIBUTION

The velocity distribution shows the dynamic balance of the bike,
both for compression and rebound
LAP MANAGER

Lap manager to see your best times on open and closed routes
MAP CHARACTERISTICS

Map characteristics about your speed, suspension compression, rebound, shocks and more
AUTO TUNING

The auto-tuning provides precise instructions on how to obtain a proper setting
SOFTWARE OVERVIEW
Watch our tutorials about the PC software on YouTube
DEVICE


Connect to the acquisition unit wirelessly
Change the device configuration,
the sampling rate, the BYB sampling mode or switch in seconds to your MX bike
RUNS

Download your runs in minutes straight to your phone

Manage your runs and upload them to the Dropbox client
MAP and VALUES


Navigate trough your route
Consult all the values of your suspension, front axle or rear axle.
LINES and HISTOGRAMS

Analyze your suspension, brakes, speed & more

Easy-to-read and intuitive charts and statistical distributions
AUTO TUNING

Open a run, select your riding level and tune your suspension better (and faster) than ever!
APP OVERVIEW
Watch our tutorials about the smartphone app on YouTube
MOUNTAINBIKE
ACQUISITION UNIT
-
10 analog channels
-
Built-in sensors (GPS, 3-axis accelerometer and gyro)
-
1000 Hz sampling rate
-
MTB and MX mode
-
Easy-to-use interface
-
On-board wireless connection technology
-
Waterproof anodized aluminum case
-
More than10 hours of continuous sampling
-
16 GB of storage
-
Made in Italy
BUILT-IN SENSORS
-
Automotive grade-GPS
-
3-axis accelerometer
-
3-axis gyroscope
​
BYB detects the shock and the vibrations at the handlebar plus the spatial orientation of the bike.
​
The GPS is equipped with an external antenna in order to get a strong signal also inside the woods. Precise comparison needs an equally accurate GPS.

1000 HZ SAMLING RATE

BYB Telemetry offers 1000 Hz sampling rate for the best accuracy and to capture all the typical high-speed off-road impacts.
AUTOMATIC CALIBRATION

BYB Telemetry performs an automatic zero calibration while riding.
The sensors included in the kit can be used with all forks below 200mm and shock absorbers below 75mm.
SUSPENSION SENSORS
-
Custom 200mm fork sensor
-
Custom 75mm shock sensor
-
Motorsport-grade technology
-
Compact body
-
Auto-alignament universal and removable joints
-
IP65 sealing (with low actuation force)

BRAKE SENSORS

SPEED SENSOR

The brake sensors are fast to install and don't require opening the hydraulic circuit. They're available in analog and digital versions.
The speed sensor is fast to install and measures the real speed of the bike, regardless of GPS reception.
MOUNTINGS
The kit is provided with a full set of universal mountings:
-
Easy-to-install
-
Installable on air & spring-based suspension
-
Plastic and CNC milled mountings

UNIVERSAL BETWEEN SEVERAL DISCIPLINES

MOTOCROSS
ACQUISITION UNIT
-
10 analog channels
-
Built-in sensors (GPS, 3-axis accelerometer and gyro)
-
1000 Hz sampling rate
-
MTB and MX mode
-
Easy-to-use interface
-
On-board wireless connection technology
-
Waterproof anodized aluminum case
-
More than10 hours of continuous sampling
-
16 GB of storage
-
Made in Italy
BUILT-IN SENSORS
-
Automotive grade-GPS
-
3-axis accelerometer
-
3-axis gyroscope
​
BYB detects the shock and the vibrations at the handlebar plus the spatial orientation of the bike.
​
The GPS is equipped with an external antenna in order to get a strong signal also inside the woods. Precise comparison needs an equally accurate GPS.

1000 HZ SAMLING RATE

BYB Telemetry offers 1000 Hz sampling rate for the best accuracy and to capture all the typical high-speed off-road impacts.
AUTOMATIC CALIBRATION

BYB Telemetry performs an automatic zero calibration while riding.
The sensors included in the kit can be used with all forks below 200mm and shock absorbers below 75mm.
SUSPENSION SENSORS
-
Custom 200mm fork sensor
-
Custom 75mm shock sensor
-
Motorsport-grade technology
-
Compact body
-
Auto-alignament universal and removable joints
-
IP65 sealing (with low actuation force)

BRAKE SENSORS

SPEED SENSOR

The brake sensors are fast to install and don't require opening the hydraulic circuit. They're available in analog and digital versions.
The speed sensor is fast to install and measures the real speed of the bike, regardless of GPS reception.
MOUNTINGS
The kit is provided with a full set of universal mountings:
-
Easy-to-install
-
Installable on air & spring-based suspension
-
Plastic and CNC milled mountings

UNIVERSAL BETWEEN SEVERAL DISCIPLINES
